MG-1 Mk.II | Custom | ASUS ROG CROSSHAIR X870E HERO
Setup Guide

Welcome to your new MAINGEAR MG-1!
This guide will walk you through each step to get your system connected and powered on. Your MG-1 was professionally built, configured, and tested by the MAINGEAR team to deliver exceptional performance and reliability right out of the box. We recommend reviewing this guide in full for helpful tips and guidance on key features, including RGB lighting and Wi-Fi setup.
Before you begin
A few things to check first...
Unpack your MG-1
Before removing your system, check the inner flaps at the top of the box for helpful unboxing tips.
We strongly recommend keeping all original packaging and shipping materials. These are important if you ever need to transport your PC or send it in for upgrades or service.
Find the right spot for your MG-1
Airflow is critical for high-performance PCs and directly impacts frame rates, system stability, and component longevity. Make sure there is clear space on all sides of the system, especially near intake and exhaust areas.
Avoid placing your MG-1 directly on carpet or inside enclosed cabinets and tight spaces, as this can restrict airflow and trap heat.
Click here for more info on optimizing cooling and airflow for your PC.
Let's get started
Setup
Connect your monitor
Connect your monitor to the graphics card on the back of your system. Supported display connections include DisplayPort and HDMI. We recommend using DisplayPort when available.
Do not connect your monitor to the motherboard display ports. Your HDMI or DisplayPort cable should be plugged into the graphics card.
If your cable is going in vertically near the USB ports, it’s likely in the wrong place. The correct ports are on the graphics card, positioned horizontally near the center of the rear of the PC.
Connect to the internet
You can connect your system using Wi-Fi (wireless) or Ethernet (wired). A wired connection typically offers the fastest and most stable experience.
If using Wi-Fi, be sure to install the antenna first. It is included in your accessory box and attaches to the gold terminals on the rear I/O panel of your system.
Even if you’re using Ethernet, installing the antenna is recommended to enable Bluetooth functionality.
Connect a mouse and keyboard
Plug in your mouse and keyboard, or their wireless receivers, into any available USB port.
We recommend using the rear USB ports so the front ports remain open for quick access to devices like headsets, external storage, or cameras.
Connect headphones or speakers
For USB audio devices, we recommend using a USB 10Gbps Type-A port on the rear of your system. The ports on the rear will typically provide a cleaner signal than the front panel connections. For analog audio, connect your device using a standard 3.5mm cable to the line out audio jack on the rear I/O panel. For digital audio, the rear I/O panel also includes an optical S/PDIF output.
For the best audio quality and lowest latency, connect audio devices directly to your MG-1 rather than through a monitor or hub when possible.
Connect the power cable
Securely connect the included AC power cable into the back of your MG-1, then connect it to a grounded wall outlet or a properly rated surge protector.
Locate the power supply switch on the back of the system and set it to the ON position. (I = ON, O = OFF)
Not all surge protectors or uninterruptible power supplies (UPS) are created equal. If using one, make sure it is rated to handle the total power draw of all connected devices. High-performance PCs can require significant power, and using an underrated power source may lead to instability or other system issues.
Prepare your battlestation
Before powering on your system for the first time, it’s important to prepare your battlestation, also known as your desk.
Clear out any sandwich crumbs, empty energy drinks, loose change, and the mysterious cables from devices long forgotten. Create a space worthy of your MG-1.
It is scientifically unproven but widely accepted that a clean desk directly improves in-game performance.
Power on your MG-1
Press the blue power button on the top of your system to start it up. Your MG-1 will begin the boot process and automatically launch the Windows setup experience. Follow the on-screen instructions to connect to the internet, sign in or create your Microsoft account, and finish configuring your system.
Review privacy settings carefully. Windows enables several data sharing options by default. Take a minute to toggle off anything you do not need, like location tracking or diagnostic sharing.
I/O
Connectivity
Your MG-1 offers several types of connectivity.
Rear ports

The rear ports on your MG-1 are labeled for easy identification. Supported connectivity includes the following:
- 5Gbps LAN Port (Realtek, Ethernet)
- 2.5Gbps LAN Port (Intel, Ethernet)
- Wi-Fi 7 antenna terminals
- HDMI
- 2x USB4 Type-C (Up to 40Gbps)
- 6x USB-A 10Gbps
- 2x USB-C 10Gbps
- BIOS FlashBack button
- Clear CMOS button
- 2x 3.5mm Audio Jacks (Gold-plated)
- Optical S/PDIF out
While the rear I/O panel offers an HDMI port and USB4 Type-C ports that can output video, these do not make use of your system's dedicated graphics card. For the best performance, connect your display(s) directly to the graphics card.
Top ports

The Front I/O on your MG-1 are located at the top of the chassis. Supported connectivity includes the following (listed top down following the image above):
- USB 5Gbps Type-A
- USB 20Gbps Type-C
- 3.5mm audio combo jack
- Reset button
- Power button
Let it glow
RGB lighting control
Along with the case lighting, components in your MG-1 feature built in RGB illumination. You can personalize colors and effects using the ASUS Armoury Crate utility, which controls Aura Sync lighting on your ROG CROSSHAIR X870E HERO. Follow the steps below to get started.
Opening Armoury Crate
- Open the Start menu and search for "Armoury Crate"
- Select Armoury Crate to launch it
- If prompted, allow it to finish its first-time setup and updates
Armoury Crate offers a wide range of optional features, but MAINGEAR recommends using it for lighting control only. This helps keep your MG-1 running clean and efficient, without unnecessary software taking up system resources.
How to use Armoury Crate
- In Armoury Crate, open "Aura Sync" from the left-hand menu
- A list of detected devices will be displayed at the top of the page
- Select a device to change its RGB lighting individually
- Choose the effect you prefer, adjust color, speed, and brightness, then click "Apply" to save your settings
- Use the sync option to apply one effect across all supported lights at once. Once synced, settings can still be adjusted for all lights together
- Turn the sync option off to resume individual control
Make it yours
Standout with panel art
One of the MG-1’s award-winning design features is its swappable front panel, complete with full-bleed artwork and integrated RGB lighting, so you can personalize your system to match your style. To remove the panel, grip from the bottom and gently pull it toward you. There are no cables to disconnect. To install a new panel, simply reverse the process. Panels are fully hot swappable, so you can change them anytime, even while the system is on. When installing, align the magnets and listen for a click to ensure the panel is securely in place before letting go.
Need a hand?
Our MAINGEAR support team is ready to assist. Have your order number handy, it's available in your order confirmation email or in your MAINGEAR account.
Support disclaimer: The steps in this guide are performed by you on your own hardware. Results can vary by system configuration, and MAINGEAR cannot be responsible for issues that result from steps performed incorrectly or outside of what is described here. If you are unsure about any step, contact MAINGEAR Support before proceeding.
Phone
(+1) 908-620-9050
Mon-Fri 9am-6pm ET.
Sat 10am-1pm ET.
Sun CLOSED
Live Chat
Available for general questions and sales inquiries. Access it through the support beacon in the lower left corner. For technical support, please call or email.
Newsletter
Sign up to receive exclusive offers, product announcements, and early access to limited edition Drops.








